ο High-speed auto analyzation
JX8001 can search and locate the events and faults in trace rapidly and precisely, and then lists all events in even table, so it´s very useful to maintainers to improving efficiency and it´s unnecessary to know about the relative background knowledge.
ο Powerful file management
JX8001 offers powerful function of file management. Besides saving,browsing or deleting files to or from USB stick and built-in memory, it can be connected to laser or inkjet printer based on PCL language, and the testing report can be printed rapidly and easily. In addition,JX8001 with PC using ActiveSync via USB cable, through which the files can be translated rapidly.
ο Convenient VFL
The built-in 650nm visual fault location is ideal for easily identifying bad splice, bad connector, break or macro bend.
ο Communication light check
When measuring a fiber in service, the measuring result by an OTDR is not precise, and there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To prevent these problems, the JX8001 OTDR can detect automatically and silently if communication light is present after the fiber under test is connected, once the light is verified present, simultaneously, a warning message will be displayed and internal OTDR protection will be active instantly.
Application:
JX8001 Palm OTDR is mainly used to measure FTTx network, it provides a low cost solution for users. JX8001 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.
Manual measurement mode: manual mode is suitable for skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or average mode can be selected if necessary.
In real-time mode, the dynamic changes of fiber chain can be detected timely, it is very useful when you need to observe the effect and process of
fiber being spliced or connected.
In average measurement mode, the noise in trace can be suppressed, and the SNR(signal noise ratio) is improved, therefore,the result is more accurate. In fact, the more average times is executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.
Auto measurement mode: the optimized measurement conditions are set automatically, it´s unnecessary to operator to know about the complicated background knowledge and the further details of operating. In this mode, the more accurate results can be gained when proper average times are set, but it will increase the time of signal processing.
Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and
attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
Specifications
Main Specifications |
Main OTDR Modules | 2101 | 2103 | 3105 | 3102 |
Center wavelength | 1310nm/1550nm ±20nm | 1550nm/1625nm ±20nm (build-in filter) | 1310nm/1550nm/1490nm±20nm | 1310/1550nm/ 1625nm ±10nm (build-in filter) |
| SMF | SMF | SMF | SMF |
Dynamic Range1 | 28 / 26dB | 26 / 26dB | 28 / 26 / 24dB | 28 / 26 / 25 |
Distance Measurement Accuracy | ±(1m + sample space + measurement distance×0.003%) |
Event Dead Zone2 | ≤1.6m |
Sampling Resolution | 0.25 , 0.5 , 1 , 2 , 4 , 8 , 16m |
Distance Range | 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256km |
Pulse width | 10 , 30 , 80 , 160 , 320 , 640 , 1280 , 5120 , 10240ns |
Loss threshold | 0.01dB |
Sampling points | Up to 65k |
Linearity | 0.05dB/dB |
Memory capacity | 800 traces |
Group refractive index setting | 1.00000 - 2.00000 (0.00001 steps) |
Display | Color LCD(touch screen) |
Interface | USB,Min-USB |
| FC/UPC (universal connector) |
VFL | 650nm ± 10nm,2mW(typical);CW/1Hz |
Language | User selectable : simplified Chinese, English, Russian, Korean etc.. (please contact CETC 41st for others) |
Power Supply | DC:15V to 20V(3A),(AC adapter 100~240V, 50/60Hz,1.5A), Built-in Lithium battery:4400mAh,7.4V,operating time≥10 hours3 |
Dimensions | 210×100×60(mm) |
Weight | 1 kg Approx. |
Note1:pulse width 10240ns, average times≥300,SNR=1,23℃±2℃;
Note2:dead zone mode, distance range : ≤ 4km, pulse width:10 ns, terminal reflection loss:≥40 dB, typical;
Note3:low brightness, exclude measuring.
Ordering information:
ο Main frame
JX8001 Palm OTDR
ο Standard accessories
NO. | Name | quantity |
1 | Power line | 1 |
2 | AC/DC adapter | 1 |
3 | Quality certification | 1 |
4 | User manual | 1 |
5 | Trace analyzing software(CD) | 1 |
6 | Hard Carrying case(Including gallus) | 1 |
7 | Special gallus of instrument | 1 |
Note: the standard OTDR interface type is FC/UPC,type of FC/APC is optional.
ο Standard module
The available modules of JX8001 palm OTDR are shown as following:
Ordering number | Operating wavelength | | Dynamic range |
JX8001-1101 | 1310nm | SMF | 28 |
JX8001-1102 | 1550nm | SMF | 26 |
JX8001-1103 | 1625nm | SMF | 26 |
JX8001-1104 | 1625nm(build-in filter) | SMF | 26 |
JX8001-1105 | 1650nm | SMF | 26 |
JX8001-1106 | 1650nm(build-in filter) | SMF | 26 |
JX80011107 | 1490nm | SMF | 24 |
JX8001-1108 | 1383nm | SMF | 26 |
JX8001-2101 | 1310 / 1550nm | SMF | 28/26 |
JX8001-2102 | 1550 / 1625nm | SMF | 26 / 26 |
JX8001-2103 | 1550 / 1625nm(build-in filter) | SMF | 26 / 26 |
JX8001-2104 | 1550 / 1650nm | SMF | 26 / 26 |
JX8001-2105 | 1550 / 1650nm(build-in filter) | SMF | 26 / 26 |
JX8001-3528 | 1310 / 1550nm | SMF | 28/26 |
JX8001-5626 | 1550 / 1625nm | SMF | 26 / 26 |
JX8001-3101 | 1310 / 1550nm / 1625nm | SMF | 28 / 26 / 26 |
JX8001-3102 | 1310 / 1550nm / 1625nm(build-in filter) | SMF | 28 / 26 / 25 |
JX8001-3103 | 1310 / 1550 / 1650 nm | SMF | 28 / 26 / 26 |
JX8001-3104 | 1310 / 1550 / 1650 nm (build-in filter) | SMF | 28 / 26 / 25 |
| 1310 / 1490 / 1550nm | SMF | 28 / 24/ 26 |
JX8001-3428 | 1310 / 1490 / 1550nm | SMF | 28 / 24/ 26 |
Note:One and only one module of OTDR must be selected.
ο Options
NO. | Name | type | note |
1 | USB stick | | Saving measuring data |
2 | Printer | Hp laser Jet P2015d or Hp laser Jet 1022 | Printing traces |
3 | USB cable | | Communicating with PC |
4 | Standby battery pack | Special battery pack for JX8001 palm OTDR | Standby battery |
5 | FC/SC,FC/STConnectors | | |
Note:For the necessity of improvement, the material contained in this document is subject to change without notice.